Discharge Machine

Discharge Machine

Also known as EDM machine tools, can be divided into forming discharge machining (EDM machines) and wire electrical discharge machining (WEDM) two.
Forming Discharge Machine
(1) file storage provides more than twenty thousand (mainly determined by the size of the internal hard disk), 20,000 processing coordinate Hing processing conditions can be stored separately according to different molds or customer numbers, so with multiple sets of machining coordinates memory function and has a power outage last set of processing the coordinates and the memory function of processing conditions.
With 10 segments automatically repair fine features can be: (1) self-edit to edit the processing conditions: according to personal experience; (2) AUTOZ automatic edit: to give a maximum depth of the initial current and the completion of processing the coarseness and the processing area to select, on processing conditions will be automatically edited; (3) Intelligent condition edit: as long as the cross-sectional area of the electrode geometry \ the electrode and the workpiece material, electrode \ drill edmg to complete the coarseness and depth settings will be automatically edited the processing conditions, the above three editor can be used by the coarse, fine time to complete processing. Editing can be inserted or deleted can be more flexible to edit the processing conditions.
3 with the mirror processing circuit, the real erosion of the mirror effect. With shaking processing Hing mixed powder processing better.
4.XYZ coordinate metric, English and Chinese and English switch.
Smart coke detection set to start the coke hardware detection circuit, each discharge pulse line detection, encountered bad pulse current output will be cut off automatically reduces efficiency, it is not prone to short-circuit current caused by carbon deposition; anti coke adjustment function automatically. The case of coke processing instability, the computer automatically adjusts the processing parameters, and automatically improve slag height of automatically restore stability.
6. Processing can be modified at any time to adjust the processing conditions and depth; edited segmentation processing can choose to avoid duplicate processing of the processed processing to the first few paragraphs from the first few paragraphs.
7 functions: high jump (jump control) discharge can be set 2 to 10 times, pulled up to the (safety height) set anywhere and then go have a good slagging effect processing for deep hole machining.
8 eliminate secondary discharge function and coke to quickly move up or discharge Edge fast l function.
9 has the energy to control the selection function to turn off the energy control allows fine machining of graphite or repair more quickly and evenly. To do the processing faster.
10 up to discharge the function of (poured processing), then the special workpiece more easily.
11 with two independent processing coordinate system, the public mode and master mode in different points in the coordinate system or processing.
12 fast jump slagging, two speed slagging and slow jump slagging apply to different sizes of copper workers processing.
13 Two high-voltage circuit according to customer demand for assembly of the partial pressure or shunt. Greater use of space on the different processing
14 discharge high-voltage pulse control, can set different types of high-voltage pulse with the use of speed and consumption.
15 closer connections between the PC104 slot version and board does not have ISA slots cheat oxidation of poor contact.
16 industrial-grade PC-BASE controller and the new DOM memory to replace traditional hard disk, read the file faster high stability is more suitable for industrial use.
17 new design meets European CE safety specifications of the power supply box and 15 "CRT (display), can be dust, waterproof, anti-interference, improve the life of electronic boards.